Unpack The Scara Robot - Mitsubishi Electric SD Series Installation Description

Installation
3.1.2 Unpack SCARA robot
The robot arm us fixed to a wooden frame and packaged in a box. The following figure shows you
step-by-step how to unpack the robot arm.
Place the box on an even surface.
Use a knife or similar object to open the packaging tape, as shown in
Remove Part A of the packaging as shown in
Remove the four fixing screws with which the base is screwed onto the wooden frame (see
Transport the robot arm to the place of installation, as described in Section 3.2.
NOTE Keep the packaging and transport locks for later transport.
Fig. 3-3: Unpack the SCARA robot
SD-/SQ series
Packing tape
Transport lock B
Transport lock A
Unpacking the robot system
.
Remove
upwards
Robot arm
Supporting
.
).
Part A
R001368E
3 - 3