J&M Nitro Gro 5010 Assembly Manual page 8

1. Holes are predrilled in the tank for the fittings. Add fittings in the two holes in the back of the tank and the
hole in the front. The rubber o-ring on the fitting goes inside the tank and the nut will screw on from the
outside. These are lefthanded threads 3/4" bulkhead fittings.
2. Connect the yellow hose from the valve bank on top of the frame to the down pressure relief valve bank on
the middle of the tongue. Connect another yellow hose from the down pressure relief valve bank and drape
the hose past the front of the tongue. Attach Pioneer couplers to the six hoses draped in front of the tongue.
8
Tank