Advertisement
11. Connect hydraulic hoses to the small pump. The top hose is a 3/8" hose. The bottom hose is a 1/2" hose and
will be marked in yellow. The 1/2" hose should go in check vavle with an arrow pointing out from the pump.
12. Attach 1-1/2" pressure hose and tighten clamp (use lubricant to slip hose on fitting). Pull hose tight through
D-rings to the front of the applicator.
13. Attach the hitch using 3/4" x 6" Gr8 hex bolts and 3/4" centerlock hex nuts.
12
Tank
Advertisement
