Advertisement
13. Use 3/8" x 4" bolts, 2" plastic spacers, and 3/4" serrated flange nuts to fasten down pressure relief valve bank to
the front hydraulic hose guard. Connect hose from pressure gauge to down pressure relief valve bank.
14. Run the 1/2" x 300" and 3/8" x 300" hoses from the front of the tongue along the frame of the applicator all the
way to the hydraulic pump on the right/passenger side. Later in this process, these hoses will connect to the
pump. Mount the front hose guard using 3/8" x 1" serrated flange bolts and 3/8" serrated flange nuts.
Frame
7
Advertisement
