Advertisement
7. Connect the yellow hoses to the fittings on the side of the valve bank that are second from the top and drape
them down the center of the tongue of the applicator. They will extend to the center of the tongue. Connect
the red hoses to the bottom two fittings on the front of the valve bank and extend to the tractor.
8. Mount the tank saddles. On the rear of the saddles there are two sets of holes. One set of holes has two holes
and one has one hole. Place the saddle on the frame so the set with two holes is towards the passenger side of
the applicator. Mount the rear tank saddle first. The rear and middle tank saddles are fastened using the back
set of holes.
Frame
5
Advertisement
