Advertisement
14. Attach flow control mount using (4) 3/8" x 1" serrated flange and serrated flange nut.
15. Connect the 1-1/2" pressure hose to the Raven control valve with M200150BRB90 and tighten clamp. Connect
wire harness that comes with Raven control.
16. Connect tank shut off valve to the fitting at the bottom of the tank and tighten clamp. Ensure that the O-ring is
centered when connecting. Should be angled towards the fill valve.
17. Attach manual canister to rear driver's side of applicator using 1/4" - 3/4" bolts and 1/4" serrated flange hex
nuts.
Tank
13
Advertisement
