Product Specifications - Bennett Horizon 2 Series Installation Manual

POWER REQUIREMENTS
AC Power Input, Electronic
DC Power Supply Output
DC Power Supply Output
Lead-Acid Battery Output
Nickel-Cadmium Battery Output
NOTE: Self-Contained dispenser motors are set at the factory at 115V.
ENVIRONMENTAL REQUIREMENTS
Operating Temperature Range:
Humidity:
DIMENSIONS
2400 Series
2300-L Low Hose
2300-H High Hose
Determining the Model Number & the Dispenser Features
Determine the model number of the dispenser from the serial plate located on the front bottom rail.
Utilizing the chart below determine the features of the dispenser to be installed. Understanding the
features of the dispenser to be installed will be helpful in understanding the proper installation of the
dispenser.
How a Model for the Horizon Series Dispensers is Made Up.

Product Specifications

115 VAC, 60 Hz. at 560W or 230 VAC, 50 Hz. at 560W.
+5VDC 5.0 Amps Max, +12 VDC 1.75 Amps Max.
+24 VDC 2.75 Amps Max.
12 VDC, 2.0 Ampere Hours
+3.6 VDC, 40 Milliamp Hours
+40°C
0-95% condensing
*48" Wide x 20" Deep x 94" High
*36" Wide x 20" Deep x 60" High
*36" Wide x 20" Deep x 94" High
5
*Without Valance.
105894 Rev G 12-6-16