Safety Instructions - Bennett Horizon 2 Series Installation Manual

Electronic with 708 electronics
Table of Contents

Advertisement

WARNING
ADVERTISSEMENT
For the safe installation of this equipment, read and understand all warning and cautions. Look for these
warnings:
"DANGER" means: If you do not follow the instructions, severe injury or death will occur.
"WARNING" means: If you do not follow the instructions, severe injury or death can occur.
"CAUTION" means: If you do not follow the instructions, damage can occur to the
DANGER: Fire, explosion, injury or death
will occur if fuel filters are changed by untrained
personnel.
Make sure only trained personnel
change filters.
DANGER: To prevent injury to you from
vehicles and onlookers, always place a barrier
around this equipment before performing service
or maintenance.
DANGER: Gasoline is flammable.
NO SMOKING OR OPEN FLAME.
DANGER:
Disconnect all power to this
equipment and associated submerged pump(s)
during installation, service or any maintenance,
i.e., changing filters.
WARNING: You must have training in the
installation, service or maintenance of this
equipment (dispenser, pump, console, control
box or submerged pump) before working on it.
Maintenance
repairs
must
authorized personnel only. Warranty work may
only
be
performed
by
technicians.
WARNING:
To prevent electric shock,
keep the electrical parts of the dispenser dry.
IMPORTANT: All trained and licensed technicians must work in accordance to all requirements,
standards, and guidelines specified by the suppliers Environmental Standards® Health, Safety,
Security & Environment (HSSE) policies. Note: Bennett Pump highly recommends all technicians
observe HSSE policies defined by the supplier. Bennett Pump does not impose any restrictions or
additional requirements contained in Environmental Standards® Health, Safety, Security & Envi-
ronment (HSSE) policies.
READ AND UNDERSTAND ALL WARNING LABELS ATTACHED TO THE DISPENSER
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interface, and (2) this device must accept
interference received, including interference that may cause undesired operation.

Safety Instructions

ADVERTENCIA
static sensitive. Use proper static precautions
(static straps) before working on the equipment.
(also called the fire valve, shear valve or impact
valve)
maintenance is performed on this equipment.
operation and programming of this dispenser
before using it.
MANUAL.
correctly grounded.
injury or
operation.
warranty.
dispenser, always level the dispenser with shims
before bolting to the island. DO NOT shim just
be
done
by
the middle of the dispenser and bolt down.
Bennett
certified
dispensers.
electronic equipment. The warranty will become
void. Use only adhesive backed sign mounting
brackets.
NOTICE
4
WARNING:
Electronic components are
WARNING: The emergency shut-off valve
must
be
closed
when
WARNING: You must have training in the
READ THE OPERATORS
WARNING: Make sure this equipment is
Failure to do will cause
damage equipment or
Improper
grounding
WARNING:
When
CAUTION:
Do not drill holes in fuel
Holes can cause failure of the
105894 Rev G 12-6-16
service
or
improper
voids
the
anchoring
the

Advertisement

Table of Contents
loading

Table of Contents