Introduction; Product Specifications; Features And Capabilities - Bennett 3000 Series Service Manual

All of the dispensers shown in this manual can be operated in the "Stand Alone" mode (no control
console), OR RS485 interface to a Fleet Management System where only volume data is recorded OR
Dual Phase Pulse Output to a Fleet Management System where only volume data is required.
AC Power Input, Electronic ............................................. Universal Input 85-270 Volts A.C. 50/60 Hz.
DC Power Supply Outputs ............................................. +5VDC 100mA Max, +12 VDC 100mA Max.
DC Power Supply Outputs ................................ +24 VDC 1.0 Amps Max., +5VDC Isolated 50mA Max
Nickel-Cadmium Battery Output
NOTE: Self-Contained dispenser motors are set at the factory at 115V.
ENVIRONMENTAL REQUIREMENTS
Operating Temperature Range: ....................................................... -30°C to +50°C (-22°F to +122°F)
Humidity ................................................................................................................. 0-95% Condensing
DIMENSIONS
3700/3800 Series Low Hose (height, width, depth) ....................................... *60" H x 30" W x 20" D
3700/3800 Series High Hose (height, width, depth) ...................................... *88" H x 30" W x 20" D
1. A self-monitoring pulser will prevent product flow in the event of a malfunction.
2. 1" high LCD displays which are lighted from the back with high efficiency, low power LEDs for easier
viewing.
3. A +3.6 volt DC nickel-cadmium battery retains totals and programmed information in the RAM
memory during power failures for up to 10 days.
4. On board battery that maintains last sale information for 15 minutes in the event of power loss.
5. All units have conformal coated electronic boards to help protect them from moisture or foreign
material damage.
temperature cycled.
6. The dispenser meets or exceeds FCC Emission Standards and UL specifications.
7. Dispenser programming is done with jumpers on the CPU board.

Introduction

Product Specifications

Features and Capabilities

All major electronic board assemblies are environmentally tested and
4
+10.8VDC, 40 Milliamp Hours
*Without Valance.
107932 Rev G 4-24-17