Safety Instructions - Bennett Natural Gas Series Operator's Manual

WARNING ADVERTISSEMENT
For the safe installation of this equipment, read and understand all warning and cautions. Look for these
warnings:
"DANGER" means: If instructions are not followed, severe injury or death will occur.
"WARNING" means: If instructions are not followed, severe injury or death can occur.
"CAUTION" means: If instructions are not followed, damage can occur to the equipment.
DANGER: To prevent injury from
vehicles and onlookers, always place a barrier
around this equipment before performing service
or maintenance.
DANGER: LNG is flammable.
NO SMOKING OR OPEN FLAME.
DANGER: LNG can cause serious burns on
skin. Protective gear (gloves, long sleeves, face
shield, etc...) must be worn while servicing the
equipment.
DANGER: Disconnect all power and
relieve pressure to this equipment and
associated pump during installation, service or
any maintenance, i.e., changing filters.
WARNING: Training is needed in the
installation, service or maintenance of this
equipment (dispenser, pump, console, control
box) before working on it. Maintenance repairs
must be done by authorized personnel only.
WARNING: To prevent electric shock,
keep the electrical parts of the dispenser dry.
READ AND UNDERSTAND ALL WARNING LABELS ATTACHED TO THE DISPENSER
Safety Instructions LNG
ADVERTENCIA
static sensitive. Use proper static precautions
(static straps) before working on the equipment.
the incoming LNG Line must be closed when
service or maintenance is performed on this
operation and programming of this dispenser
before using it. READ THE OPERATORS
MANUAL.
correctly grounded. Failure to do will cause
injury or damage equipment or improper
operation. Improper grounding voids the
warranty.
dispenser, always level the dispenser with shims
before bolting to the island. DO NOT shim just
the middle of the dispenser and bolt down.
dispensers. Holes can cause failure of the
electronic equipment. The warranty will become
void. Use only adhesive backed sign mounting
brackets.
3
WARNING: Electronic components are
WARNING: The Globe shut-off valve for
WARNING: Training is needed in the
WARNING: Make sure this equipment is
WARNING: When anchoring the
CAUTION: Do not drill holes in fuel
123919 Rev C 5-17-18