Safety Instructions - Bennett 4000 Series Operator's Manual

Remote and self contained dispensers with 819 and 619 electronics
Table of Contents

Advertisement

Bennett 4k Series Operators Manual
For safe installation of this equipment, read and understand all dangers, warnings, and cautionary information. Save
this safety information in a readily accessible location. Look for the following warnings throughout the manual:
Red and White "DANGER" means: If you do not follow the instructions, severe injury or death will occur.
Orange and Black "WARNING" means: If you do not follow the instructions, severe injury or death can occur.
Yellow and Black "CAUTION" means: If you do not follow the instructions, damage can occur to the dispenser.
DANGER
FIRE, EXPLOSION, INJURY, OR DEATH WILL OCCUR IF FUEL FILTERS ARE CHANGED BY
UNTRAINED PERSONNEL. MAKE SURE, ONLY TRAINED PERSONNEL CHANGE FILTERS.
TO PREVENT INJURY TO YOU FROM VEHICLES AND ONLOOKERS, ALWAYS PLACE A
BARRIER AROUND THIS EQUIPMENT BEFORE PERFORMING SERVICE OR
MAINTENANCE.
GASOLINE IS FLAMMABLE. NO SMOKING OR OPEN FLAME.
DISCONNECT ALL POWER, RELIEVE PRESSURE TO THIS EQUIPMENT, AND ASSOCIATED
COMPRESSOR DURING INSTALLATION, SERVICE, OR ANY MAINTENANCE I.E.,
CHANGING FILTERS.
WARNING
You must have training in the installation, service, or maintenance of this equipment
(dispenser, pump, console, control box, or submerged pump) before working on it.
Maintenance repairs must be done by authorized personnel only. Warranty work may only be
performed by Bennett Certified Technicians.
To prevent electric shock, keep the electrical parts of the dispenser dry.
Electronic components are static sensitive. Use proper static precautions (e.g. static straps)
before working on the equipment.
The emergency shut-off valve (also called the fire valve, shear valve, or impact valve) must be
closed when service or maintenance is performed on this equipment.
You must have training in the operation and programming of this dispenser before using it.
READ THE OPERATORS MANUAL.
Make sure this equipment is correctly grounded. Failure to do will cause injury or damage
equipment or improper operation. Improper grounding voids the warranty.
When anchoring the dispenser, always level the dispenser with shims before bolting to the
island. DO NOT shim the middle of base rails to bolt down the dispenser.
If the breakaway is not provided then one must be installed that will disengage at 150lbs.
CAUTION
Do not drill holes in fuel dispensers. Holes can cause failure of the electronic equipment.
THE WARRANTY WILL BECOME VOID. Use only adhesive backed sign mounting brackets
!! READ AND UNDERSTAND ALL WARNING LABELS ATTACHED TO THE DISPENSER !!

Safety Instructions

PELIGRO
ADVERTENCIA
PRECAUCIÓN
iii
Safety Instructions
DANGER
MISE EN GARDE
MISE EN GARDE
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents