Safety Instructions - Bennett LNG Series Installation Manual

Bennett LNG Series Installation Manual
For safe installation of this equipment, read and understand all dangers, warnings, and cautionary information. Save
this safety information in a readily accessible location. Look for the following warnings throughout the manual:
Red and White "DANGER" means: If you do not follow the instructions, severe injury or death will occur.
Orange and Black "WARNING" means: If you do not follow the instructions, severe injury or death can occur.
Yellow and Black "CAUTION" means: If you do not follow the instructions, damage can occur to the dispenser.
DANGER
FIRE, EXPLOSION, INJURY, OR DEATH WILL OCCUR IF FUEL FILTERS ARE CHANGED BY
•
UNTRAINED PERSONNEL. MAKE SURE, ONLY TRAINED PERSONNEL CHANGE FILTERS.
TO PREVENT INJURY TO YOU FROM VEHICLES AND ONLOOKERS, ALWAYS PLACE A
•
BARRIER AROUND THIS EQUIPMENT BEFORE PERFORMING SERVICE OR MAINTENANCE.
LNG IS FLAMMABLE. NO SMOKING OR OPEN FLAME.
•
LNG CAN CAUSE SERIOUS BURN ON SKIN. PROTECTIVE GEAR (GLOVES, LONG SLEEVES,
•
FACE SHIELD, ETC....) MUST BE WORN WHILE SERVICING THE EQUIPMENT.
DISCONNECT ALL POWER AND RELIEVE PRESSURE TO THIS EQUIPMENT AND
•
ASSOCIATED COMPRESSOR DURING INSTALLATION, SERVICE, OR ANY MAINTENANCE
I.E., CHANGING FILTERS.
ENVIRONMENT NEEDS TO BE CLEARED OF ANY HAZARDOUS GASES BEFORE
•
PERFORMING ANY WORK.
WARNING
Training is needed in the installation, service, or maintenance of this equipment (dispenser,
•
pump, console, or control box) before working on it. Maintenance repairs must be done by
authorized personnel only.
To prevent electric shock, keep the electrical parts of the dispenser dry.
•
Electronic components are static sensitive. Use proper static precautions (static straps) before
•
working on the equipment.
The Globe shut-off ball valve for the incoming LNG Line must be closed when service or
•
maintenance is performed on this equipment.
You must have training in the operation and programming of this dispenser before using it.
•
READ THE OPERATORS MANUAL.
Make sure this equipment is correctly grounded. Failure to do will cause injury or damage
•
equipment or improper operation. Improper grounding voids the warranty.
When anchoring the dispenser, always level the dispenser with shims before bolting to the
•
island. DO NOT shim the middle of base rails to bolt down the dispenser.
CAUTION
Do not drill holes in fuel dispensers. Holes can cause failure of the electronic equipment.
•
THE WARRANTY WILL BECOME VOID. Use only adhesive backed sign mounting brackets.

Safety Instructions

PELIGRO
ADVERTENCIA
PRECAUCIÓN
iii
Safety Instructions
DANGER
MISE EN GARDE
MISE EN GARDE