Screen
Symbol
▲
▼
▒
0 thru 9,
Minus,
Decimal
A thru Z, 0 thru
9 special
symbols
4.5
Editing a Numeric Value
Editing a Numeric Value
Editing of a numeric value is a digit-by-digit process, starting with the left-most digit.
↵
1.
Press
to begin the edit process.
2.
The Advanced Display will show the current value of the item in a pop-up window in the middle of
the screen
Press the or buttons to select the desired digit, and then press
3.
the right.
After the last digit has been entered, press ↵ one more time to write the new value to the Remote
4.
Indicator.
Selecting a new setting from a list of choices
Use the procedure described below to select a new setting for parameters that present a list of
choices (e.g., Screen Format, Display Units, etc.).
↵
1.
Press
to begin the edit process.
The Advanced Display will show the current setting of the item in a pop-up window.
o
Press the or buttons to scroll through the list of choices.
2.
↵
3.
Press
to make your selection. The new selection will be stored in the Remote Indicator and will
be displayed on the lower line, right justified.
Revision 4
Foundation Fieldbus RMA803 Remote Indicator User's Guide
Table 6: Three-Button Data Entry
Numeric data entry
Display the high limit for this parameter.
This symbol only appears in the left-most
position of the data entry field.
Display the low limit for this parameter.
This symbol only appears in the left-most
position of the data entry field.
Terminate the numeric entry
These characters are used to enter
numeric values. The minus sign only
appears in the left-most digit.
Not Available
Text entry
Not Available
Not Available
Terminate the text entry
These characters can be used to
create custom tags and unit labels
These characters can be used to
create custom tags and unit labels
↵
to advance to the next digit to
Page 17