Honeywell SmartLine RMA800 User Manual page 83

Parameter
DISABLE_5
DISABLE_6
DISABLE_7
DISABLE_8
SELECT_TYPE
MIN_GOOD
SELECTED
OP_SELECT
UPDATE_EVT
BLOCK_ALM
LICENSE_STAT
US_IS
Revision 4 Foundation Fieldbus RMA803 Remote Indicator User's Guide
Parameter to switch off the input from being used. 0-Use, 1 -Disable.
Parameter to switch off the input from being used. 0-Use, 1 -Disable.
Parameter to switch off the input from being used. 0-Use, 1 -Disable.
Parameter to switch off the input from being used. 0-Use, 1 -Disable.
Determines the selector action: First Good, Minimum, Maximum, Middle,
and Average.
The minimum number of inputs which are "Good" is less than the value of
MIN_GOOD then set the OUT status to "Bad".
The integer indicating the selected input number.
An operator settable parameter to force a given input to be used.
This alert is generated by any change to the static data.
The block alarm is used for all configuration, hardware, connection failure,
or system problems in the block. The cause of the alert is entered in the
subcode field. The first alert to become active sets the Active status in the
Status parameter. As soon as the Unreported status is cleared by the
alert reporting task, another block alert may be reported without clearing
the Active status, if the subcode has changed.
License status of the function block.
Description
Page 67