Parameter List; Table 25: Mao Block Parameters - Honeywell SmartLine RMA800 User Manual

11
12
13
14
15

Parameter list

Parameter
ST_REV
TAG_DESC
STRATEGY
ALERT_KEY
MODE_BLK
BLOCK_ERR
CHANNEL
IN_1
IN_2
IN_3
IN_4
IN_5
IN_6
IN_7
IN_8
MO_OPTS
Page 88 Foundation Fieldbus RMA803 Remote Indicator User's Guide
Use fault state value on
restart 4
Use fault state value on
restart 5
Use fault state value on
restart 6
Use fault state value on
restart 7
Use fault state value on
restart 8

Table 25: MAO block parameters

The revision level of the static data associated with the function block.
The user description of the application of the block.
Used to identify grouping of blocks. This data is not checked or
processed by the block.
The identification number of the plant unit. This information may be
used in the host for sorting alarms, etc.
The actual, target, permitted, and normal modes of the block. Target:
The mode to "go to"
Actual: The mode the "block is currently in"
Permitted: Allowed modes that target may take on
Normal: Most common mode for target
This parameter reflects the error status associated with the hardware or
software components associated with a block. It is a bit string so that
multiple errors may be shown.
It is used for accessing LCD Transducer Block of RMA803 device.
This is an input1 for the MAO function block.
This is an input2 for the MAO function block.
This is an input3 for the MAO function block.
This is an input4 for the MAO function block
This is an input5 for the MAO function block.
This is an input6 for the MAO function block.
This is an input7 for the MAO function block.
This is an input8 for the MAO function block.
This is an optional parameter for specifying output operations for the
MAO function block. It is mainly used for specifying values to be
transferred to LCD Transducer Block in fault state status.
Used when the input 4 is in the fault state at
restart
Used when the input 5 is in the fault state at
restart
Used when the input 6 is in the fault state at
restart
Used when the input 7 is in the fault state at
restart
Used when the input 8 is in the fault state at
restart
Description/Remarks
Revision 4