Parameter List; Table 23: Arithmetic Block Parameters - Honeywell SmartLine RMA800 User Manual

Parameter List

Parameter
ST_REV
TAG_DESC
STRATEGY
ALERT_KEY
MODE_BLK
BLOCK_ERR
PV
OUT
PRE_OUT
PV_SCALE
OUT_RANGE
GRANT_DENY
INPUT_OPTIONS
IN
IN_LO
IN_1
IN_2
IN_3
RANGE_HI
RANGE_LO
Revision 4 Foundation Fieldbus RMA803 Remote Indicator User's Guide

Table 23: Arithmetic block parameters

The revision level of the static data associated with the function block.
The revision value increments each time a static parameter value in the
block is changed.
The user description of the application of the block.
Used to identify grouping of blocks. This data is not checked of
processed by the block.
The identification number of the plant unit. This information may be used
in the host for sorting alarms, etc.
The actual, target, permitted, ad normal modes of the block.
Target: The mode to "go to"
Actual: The mode the "block is currently in"
Permitted: Allowed modes that target may take
Normal: Most common mode for target.
This parameter reflects the error status associated with the hardware or
software components associated with a block. It is a bit string so that
multiple errors may be shown.
It calculates the proportions of IN and IN_LO to for PV.
The analog output value and status.
Displays what would be the OUT value if the mode is AUTO or lower.
The high and low scale values, the engineering units' code, and the
number of digits to the right of the decimal point associated with the PV.
The high and low scale values, engineering units code, and number of
digits to the tight of the decimal point associated with OUT.
Options for controlling access of host computers and local control panels
to operating, tuning, and alarm parameters of the block. (Not used by
the device)
Option bit string for handling the status of the auxiliary inputs.
The block input value and status.
Input of the low range Remote Indicator, in a range extension
application.
The first block input value and status.
The second block input value and status.
The third block input value and status.
Constant value above which the range extension has switch to the high
range Remote Indicator.
Constant value below which the range extension has switch to the high
range Remote Indicator.
Description
Page 81