Honeywell SmartLine RMA800 User Manual page 68

Parameter
UNIT_TYPES
CUSTOM_UNIT
CUSTOM_TAG
DISPLAY_TEMPLATE
DECIMALS
TREND_DURATION
PV_LOLIM
PV_HILIM
DISPLAY_MESSAGE
SCREEN_ROTATION
Page 52 Foundation Fieldbus RMA803 Remote Indicator User's Guide
Unit selection for screen process value. Appropriate units need
to be selected based on the configured parameter. If desired
units are not present, 'custom' may be selected. The
UNIT_TYPES is present in all the eight screens:
UNIT_TYPES_1, UNIT_TYPES_2, UNIT_TYPES_3,
UNIT_TYPES_4, UNIT_TYPES_5, UNIT_TYPES_6,
UNIT_TYPES_7 and UNIT_TYPES_8
Character string to represent custom units. This value is used
when Unit type of 'custom' is selected. Size: 8 Characters. The
CUSTOM_UNIT is present in all the eight screens:
CUSTOM_UNIT_1, CUSTOM_UNIT_2, CUSTOM_UNIT_3, and
CUSTOM_UNIT_4.
Tag to be displayed for the screen. Length: 14 Characters. The
CUSTOM_TAG is present in all the eight screens:
CUSTOM_TAG_1, CUSTOM_TAG_2, CUSTOM_TAG_3,
CUSTOM_TAG_4, CUSTOM_TAG_5, CUSTOM_TAG_6,
CUSTOM_TAG_7 and CUSTOM_TAG_8.
Represents the display screen template. Possible Values:
a) PV: Regular PV value is displayed
b) PV and Trend: PV value followed by a Trend is shown on
the display
c) PV and Bargraph: PV value followed by a Bargraph is
shown on the display
d) None: Screen will not be seen.
The DISPLAY_TEMPLATE is present in all the eight screens:
DISPLAY_TEMPLATE_1, DISPLAY_TEMPLATE_2,
DISPLAY_TEMPLATE_3, DISPLAY_TEMPLATE_4,
DISPLAY_TEMPLATE_5, DISPLAY_TEMPLATE_6,
DISPLAY_TEMPLATE_7 and DISPLAY_TEMPLATE_8
Number of digits to display after the decimal point. Range: 0 - 3.
DECIMALS is present in all the eight screens: DECIMALS_1,
DECIMALS_2, DECIMALS_3, DECIMALS_4, DECIMALS_5,
DECIMALS_6, DECIMALS_7 and DECIMALS_8
Duration of a trend screen in hours. Its valid range is 1-24. The
TREND_DURATION is present in all the eight screens:
TREND_DURATION_1, TREND_DURATION_2,
TREND_DURATION_3, TREND_DURATION_4,
TREND_DURATION_5, TREND_DURATION_6,
TREND_DURATION_7 and TREND_DURATION_8.
PV low limit
PV high limit
A message with a maximum of 64 characters that appears on the
advanced display of the Remote Indicator.
Configurable screen rotation timing (4 to 30 sec).
Description
Revision 4