Table 10: Information Menus - Honeywell SmartLine RMA800 User Manual

<Return> Return to the Level 1 menu
<Return>
Display
Firmware Version
<Return>
Firmware Version
Elec Module
Protocol
<Return>
Model
Model Key
<Return>
Additional FB
Options
Serial Number
License Key
The integrated circuits in the Remote Indicator PWA are vulnerable to damage by stray
static discharges when removed from the Electronics Housing. Minimize the possibility of static
discharge damage when handling the PWA as follows:
Do not touch terminals, connectors, component leads, or circuits when handling the
PWA.
When removing or installing the PWA, handle it by its edges or bracket section
only. If you need to touch the PWA circuits, be sure you are grounded by staying in
contact with a grounded surface or by wearing a grounded wrist strap.
When the PWA is removed from the Remote Indicator, put it in an electrically
conductive bag, or wrap it in aluminum foil to protect it.
Page 22 Foundation Fieldbus RMA803 Remote Indicator User's Guide

Table 10: Information Menus

The firmware version of the Display
Module
The firmware version of the Electronics
Module
The communications protocol of the
Remote Indicator:
FF: Foundation Fieldbus
Identifies the type and range of the
Remote Indicator
Indicates the status of Enabled or
Disabled
Unique serial number of the Remote
indicator
License key to enable optional function
block
Read Only
Read Only
Read Only
Read Only
Read only
Read only
Write only
Revision 4