Editing A Numeric Value; Selecting A New Setting From A List Of Choices; The Standard Display Menu - Honeywell RMA801 User Manual

4.3.3

Editing a Numeric Value

Editing of a numeric value is a digit-by-digit process, starting with the left-most digit.
↵ ↵ ↵ ↵
1. Press to begin the edit process.
2. The Standard Display will show the current value of the item on the lower line, left justified.
3. Press the button to select the desired digit, and then press
the right.
4. After the last digit has been entered, press ↵ ↵ ↵ ↵ one more time to write the new value to the
Remote Indicator.
4.3.4

Selecting a new setting from a list of choices

Use the procedure described below to select a new setting for parameters that present a list of choices
(e.g., PV display, Temperature Units, Pressure Units etc.).
↵ ↵ ↵ ↵
1. Press to begin the edit process.
o The Standard Display will show the current setting of the item on the lower line.
2. Press the buttons to scroll through the list of choices.
↵ ↵ ↵ ↵
3. Press to make your selection. The new selection will be stored in the Remote Indicator and
will be displayed on the lower line, right justified.
4.3.5

The Standard Display Menu

The Standard Display menu is implemented as one long single-level menu, after entering into Menu
mode, and will "wrap around" when it reaches the end of the menu. To enter Menu mode select
PV display mode. Operation is as follows:
1. Select <Exit Menu> and press ↵ to exit the Menu.
2. Use the Menu button to scroll through the list of menu items.
↵ ↵ ↵ ↵
3. Press the button to select an item for data entry or activation. When an item is selected for data
entry or activation, the cursor will jump to the lower line of the LCD to allow editing of the value. No
action is taken against a menu item until the user presses the
4. If you want to abort a data entry operation, simply refrain from pushing any buttons for more than 10
seconds; the data entry operation will time out and the original value of the selected item will be
preserved.
5. If you want to abort a menu operation, simply refrain from pushing any buttons for more than 60
seconds; the menu operation will time out and from the display will exit from the menu. The display
will show the PV value.
Revision 2 RMA803 Remote Indicator User's Guide
↵ ↵ ↵ ↵
to advance to the next digit to
↵ ↵ ↵ ↵
button.
↵ ↵ ↵ ↵
in
18