Measured Value - Honeywell Envitec MySignO Operating Manual

Oxygen measuring device MySign
4.6.2

Measured value

In this mode, the system will show the current oxygen concentration. To view an overview of
the measurements that have already been performed, go to "Measurement series" in the "Data
memory" menu.
When holding the unit horizontally, the measured value will also be displayed
horizontally.
20
®
O
Select "Measured value" from the "View" menu.
Horizontal position
Doc no.: 065-07-1001825_MySignO_GB-0.pdf / 12.11
Measured value view