Netware - Adaptec 2025ZCR Installation Manual

Configuring the Controller Cache in Windows NT and Windows 2000
If you are using Windows NT 4.0, Windows 2000, perform the
following tasks after you install Storage Manager to ensure
optimum data cache performance:
1
Start Storage Manager and double-click on the controller icon
to display the Host Bus Adapter Info window.
2
Select Configure to display the Configure Host Bus Adapter
(HBA) window.
3
Select Caching. When the HBA Caching Configuration dialog
box appears, click Advisory for both settings.
4
Select OK to exit the dialog and save the changes.
5
Restart your computer so that changes take effect.

NetWare

As a prerequisite for installing Storage Manager on NetWare, your
network must include at least one client workstation that supports
Storage Manager. Therefore, in addition to installing Storage
Manager on your server, you must also install Storage Manager on a
client workstation. You manage your RAID from the client.
To install Storage manager for NetWare
1
Mount the CD. For NetWare 5, refer to the Novell documentation.
For NetWare 4.11 or 4.2, type
cd mount adaptecraid_v1 /x=usr
2
Type
adaptecraid_v1\package\netware\5.x\apps\sm\dptinst.nlm
You are prompted to select whether to load the remote
communication support immediately or delay loading until
the server is restarted. If you wait until the server restarts, you
cannot monitor the RAID from a remote client until the server
is shut down and restarted. If you load remote communication
support immediately, the remote communication support is
loaded and available as soon as you exit the install program.
3
Install Storage Manager on a client workstation. Refer to the
appropriate section for details.
Installing Storage Management Software
4-9