Adaptec Scsi Raid 3200S - Adaptec 2025ZCR Installation Manual

Adaptec SCSI RAID 3200S

P4 P6
J10
J11
J15
Part
ECCEN
ECCERR
IRQ, 8..1
J1
J2
J7, J8
J10
J11
J12
J14
J15
P1
P3
P9
P4
P6
TRMEN-A/B
TRMENHD-A
TRMPWR-A/B
ECCERR
ECCEN
J14
P1
PCI Connector
Description
ECC enabled LED (green)
ECC error LED (red)
Adapter activity LEDs
Cache memory socket 1. (During operation, this socket
must contain a memory module.)
Cache memory socket 2. (Memory is optional for this socket.)
Reserved
Internal Wide Ultra160 SCSI connector for Channel A
External Wide Ultra160 SCSI connector for Channel A
Battery module connector
Internal Wide Ultra160 SCSI connector for Channel B
External Wide Ultra160 SCSI connector for Channel B
PCI connector
Reserved
Flash Mode 0
Pins 1–2 NVRAM reset; Pins 3–4 Reserved—do not use
Device activity LED conn. (Pin 1 is nearest the top edge of the board.)
Termination enabled status LED
Upper 8-bit termination status LED for Channel A
Termination power status LED
IRQ 8 7 6 5 4 3 2 1
P3 P9
J7
J2
J8
Card and Module Diagrams
TRMEN-B
TRMENHD-A
TRMEN-A
TRMPWR-B
TRMPWR-A
Audible
Alarm
J12
J1
A-7