Adaptec 2025ZCR Installation Manual page 6

Adaptec RAID Installation Guide
Seating the Module - Adaptec 3200S/3400S Only 2-7
Seating the Module - Adaptec 2400A/2100S/3210S/3410S
Only 2-8
Installing the Battery Backup Module 2-8
Finishing up - All Models 2-9
Installing the Controller 2-9
Zero Channel RAID Controllers (2000S, 2005S) 2-10
Determining the Booting Controller 2-10
Controller IRQ and Address 2-11
Using SMOR 2-11
3 Installing the Driver
Windows 2000 3-2
Installing the Driver in a New System 3-2
Adding the Controller to an Existing System 3-4
Upgrading Windows NT to Windows 2000 3-5
Windows NT 4.0 3-6
Installing the Driver in a New System with Only One
Controller 3-7
Installing the Driver in a New System with Other
Hardware 3-8
Upgrading the Controller in an Existing System 3-9
Changing the Driver in an Existing System 3-10
Windows 95, Windows 98, and Windows Me 3-11
Creating the Driver Disk 3-12
Installing the Driver in a New Windows 98/Me
System 3-13
Installing the Driver in a New System with Windows 95
(OEM SR2 - Version 95B) 3-15
Adding the Controller to an Existing Windows 95/98/
Me System 3-17
Upgrading Windows 95 to Windows 98/Me (Upgrade
Version) 3-19
Novell NetWare 3-19
Installing the Driver for a Boot Controller in a New
NetWare 4.11 Server 3-20
Installing the Driver in a Existing NetWare 4.11
Server 3-21
vi