Adaptec 2025ZCR Installation Manual page 58

c
Remove the Adaptec RAID Installation CD and the driver
floppy disk.
2
Install and configure your Adaptec RAID controller as the
primary controller according to the instructions in
3
Create a directory on the
4
Insert the driver disk you created in
5
Type copy a:\*.* c:\nwupdate.
6
Start the NetWare installation program from the NetWare CD.
Select the Custom Installation option.
7
On the Server Drivers – Summary menu, highlight Disk and
CD-ROM Drivers and press Enter.
8
Highlight Select an Additional Driver and press Enter.
a
Select i2opci.nlm and press Enter.
b
Enter the slot number.
c
Highlight Save Parameters and Continue and press Enter.
9
When prompted to select an additional driver, select Yes.
10
Select bkstrosm.ham and press Enter.
a
Enter the slot number.
b
Highlight Save Parameters and Continue. Press Enter.
11
When prompted to select an additional driver, select No.
12
Highlight Continue Installation and press Enter.
13
Select Edit startup.ncf. If needed, edit the file so that
is listed before
14
Continue with the NetWare 4.2 installation according to the
Novell documentation.
15
Upgrade your existing NetWare server to the minimum patch
level specified by Novell.
drive named
C
in your
bkstrosm.ham
Installing the Driver
Chapter
.
nwupdate
Step 1.
file.
startup.ncf
2.
i2opci.nlm
3-23