Netware 5.X - Adaptec 2025ZCR Installation Manual

Adaptec RAID Installation Guide
The
autoexec.ncf
search add SYS:\Adaptec\SMPro
asmpsrvr.ncf
8
Press Esc to exit when prompted.
9
To begin using Storage Manager Pro, restart the server.
Alternatively, you can start Storage Manager Pro without
shutting down the server by typing
startx
search add sys:\adaptec\SMPro
asmpsrvr.ncf

NetWare 5.x

As prerequisites for installing Storage Manager Pro in a NetWare 5.x
system, you need to
1
Install the minimum support packs for your NetWare server.
2
Configure the IP address for the sever. If you do not use or
have access to DNS, add an entry to the
contains the IP address of your server and its name. This
allows Java applications to resolve the local host to the IP
address of your server.
To install Storage Manager Pro
1
Insert the Adaptec RAID Installation CD into your drive. The
server automatically mounts the CD.
2
From the system console, type
load adaptecraid_v1:\packages\netware\5.x\apps\SMPro\setup.nlm
3
If Storage Manager Pro is not already installed, skip this step. If
Storage Manager Pro is already installed, you must uninstall
Storage Manager Pro before reinstalling it. To uninstall
a
Shut down the ASMProServer service by typing asmpstop
from the system console.
b
Use the Remove Above Product option to uninstall.
4-6
file now contains
file that
sys:\etc\hosts