Adaptec 2025ZCR Installation Manual page 73

Note: Storage Manager Pro does not run on JRE 1.2.2.
Therefore, if you have JRE 1.2.2 installed on your server, you
still need to install JRE 1.1.7B.
5
Edit the server's
at the end of the file. This command initializes the graphics
console and the appropriate Java modules for Storage
Manager Pro.
To install Storage Manager Pro
1
Insert the Adaptec RAID Installation CD into your drive.
2
Mount the Adaptec RAID Installation CD as a NetWare volume
by typing cdmount adaptecraid_v1 /x=usr.
3
For NetWare 4.11, from the system console type
load adaptecraid_v1:\packages\netware\4.11\apps\SMPro\setup.nlm
For NetWare 4.2, from the system console type
load adaptecraid_v1:\packages\netware\4.2\apps\SMPro\setup.nlm
4
If Storage Manager Pro is not already installed, skip this step. If
Storage Manager Pro is already installed, you must uninstall
Storage Manager Pro before reinstalling it. To uninstall
a
Shut down the ASMProServer service by typing asmpstop
from the system console.
b
Select the Remove Above Product option to uninstall.
5
From the Select Product Option window, select Adaptec
Storage Manager Pro and press Enter. When the process is
complete, the files will be installed in
6
Press Enter to continue or F3 to specify a different path.
7
When you are asked to update the
The appropriate NLM command lines and search path are
added to
(ASMProServer) is started automatically when you restart
your computer.
sys:\system\autoexec.ncf
so that the Storage Manager Pro Server
autoexec.ncf
Installing Storage Management Software
file by typing startx
sys:\adaptec\smpro
autoexec.ncf
.
file, press Enter.
4-5