Maintenance And Cleaning - Jeio tech Lab companion SI-300 Operating Instruction

11. Maintenance and Cleaning

1. Maintenance
If the unit will not be used for a long time, maintain as follows.
1. Please turn off the power switch
2. Disconnect the power cord.
3. Clean the inside and outside of the unit. Maintain the unit with packing.
2. Cleaning the exterior for the unit
1. Wipe the exterior surface with a clean sponge or a soft fabric using a detergent..
2. Rinse off with a dry fabric using a tepid water.
3. Clean the controller Panel with a dry fabric.
● Do not use sulfuric acid, hydrochloric acid and organic solvent.
● Solvent will damage the unit.
● If the interior unit become contaminated by a toxic chemical, wash the areas
completely using a dry fabric with wearing safety gloves and mask
● Not recommending cleaning the other method without manufacturer' s direction.
Page 50