Jeio tech Lab companion SI-300 Operating Instruction page 20

If not setting the temp for
10seconds, the display
will be back in the main.
The unit Operation
 Before using the unit, Make sure the shaking direction to
p rotect the unit from the dust
 P osition the appropriate accessaries on the
table and toghten securely.
 If using the temp function, the unit should be operated
5minutes before.After maintaining the temp uniformity,
install the vessels and accessarries on the shaker table.
 Select the desired value, Starts the operation
Control of the Temperature
This control is
Controlling the temp, other function and programming temp
using of the Temp button.
Method of the setting temp
① Turns on the power switch and wait for
stabilized.
② Press Temp button.
③ Flashing the number activated on the SV display.
④ Set the desired temp with Up button and Down button
⑤ Press Enter button to finish setting.
⑥ After pressing the Start/Stop butoon, the unit operates
following the setting temp.
for the chamber
shaking
of the inner temp.
the unit
Page 19