Jeio tech Lab companion SI-300 Operating Instruction page 30

Timer set Function
The operator can set time/clock/anti clock mode whatever
wants or select the one mode.
Whole time set(HHH) : Set the hour in timer mode.
Whole time (MM:SS)set : Set the minute and seconds
Press SHAKE/SET
twice,"run.H"appeared on the
PV display. The earlier time
appeared on the SV display.
Set the time with
and Down button. Press Enter
button to finish the mode.
(Maximum Input time: 1 ~ 999
hours)
Press SHAKE/SET
times,"run.S"will be appeared
on PV display.
The previous time
displayed on the SV.
Use Up button and Down button
To set the time then, Press
Entr button.
The shake LED illuminates
(Maximum Input time: 10seconds ~
59minutes 59seconds)
☞ The whole timer is total
time of HH set and MM:SS set.
If select the one mode, the
SHAKE LED illuminates.
button
Up button
button three
will be
Page 29