Setting Monitoring Program - Jeio tech Lab companion SI-300 Operating Instruction

16. Setting Monitoring Program

1. Insert an installation CD, and then the software starts installation automatically.
(In case of no automatic running, run "SETUP.exe" file in CD.)
2. Click Next"
recommended)
3. Click " Install" to start installation.
4. Lab Tracer icon will be created on the desktop after successful installation.
5. To start Lab Tracer, double click the icon.
Standard
Beyond Microsoft Windows 98
CPU : Beyond P-II 233
RAM : Beyond 32M Byte
Caution: If Windows 95 or 98 OS system is installed, measured time can have some errors.
button to choose destination of installation. (Default folder
Recommend
Microsoft Windows 2000, XP
PU : Beyond P-III 300
RAM : Beyond 64M Byte
Page 55