Jeio tech Lab companion SI-300 Operating Instruction page 29

If not selecting the rpm
for 10seconds,
display will be back in
the main.
.
Page 28
Shaking Control Function
rpm Set
RPM indicates the rotation of motor. RPM is the same as 1cycle
of the shaking table. Please check the proper rotational.
Avaiilable rotation is 10~300RPM.
Able to set the value when the unit stops or rotate without the
timer mode.
The
① Press SHAKE/SET
" RPM"displayed on the PV,
the previous
displayed on the SV.
② U se Up button
button to select
desired rpm.
Press Enter
finish the mode.
③ Press START/STOP button or
Shake I/O button to operate
a shaker in stop position.
Or, Press Enter button to
start a shaker in working
position.
button,
rpm value
and Down
the
button to