Jeio tech Lab companion SI-300 Operating Instruction page 22

2. The moethod of using set temp on SV2
In case of the main screen, Press the TEMP button twice.
3. The method of Restoring set temp to operate
In case of the main screen, Press the TEMP button twice.
The temp unit changing function
This function is for changing the temp unit
In case of the main screen, press five times continuousluy,
The display changed.
① Press Enter button once to
display SV2 on the PV display
② After checking the SV 2 temp,
Press Enter button.
③ Press START/STOP button
to reoperate the controller
① Press Enter button once to
display SV3
On the PV display..
② After checking the SV 2 temp,
Press Enter button
③ Press START/STOP button
to reoperate the controller
Based with the Celcius setted.
Use Up button and Down button to
change the temp unit displayed by
turns.
Press Enter button to finish the
mode.
Page 21