Jeio tech Lab companion SI-300 Operating Instruction page 21

If the unit operates
related to the
temp, Press START/STOP
button
Page 20
Additional Function of Temp Button
Restoration the Set value
This function can restore Three frequently used temparatrue
Each SV1,SV2,SV3 mode.
Press the TEMP button,SV display will be activated.
Press the Temp button again,SV1 will appear on the PV display.
set
The example of the set temp
1. The method of the set temp in SV1 to operate
In case of the main screen, Press TEMP button twice.
① Select the desired temp using
of Up button and Down button.
Press Enter button to finish
setting
② Select the
restored in CPU. The PV temp
will be changed.
③ Press Temp button once,SV2 is
displayed on the PV display.
Set the desired temp same as
No.1
④ Press Temp button one
① Dispalayed SV1
display and Set temp on the SV
display.
② Press Enter button.
③ Press START/STOP to reoperate
the controller.
temp can be
on the PV