Jeio tech Lab companion SI-300 Operating Instruction page 16

And it blocks off the power to be authorized with a power switch, and Off gets a
power switch done and all blocks off 2 phase of the power supplied with to an each
part of appliances, and configuration does the safe state that only a Ground part is
connected. At this time light is effective on Temp LED if closes a door again and
presses a Button.
(17) Lamp
Lamp is for observing the inside.
(18) Power Code
(19) Fuse
Fuse is for protecting the unit from the momentary
When exchanging the Fuse, check the main power.
Model
SI-300/600
SI-300R/600R
(20) Drain Hose Nipple
Drain hose nipple is for draining the moisture in evaporator.
(21) Filter
Filter by outboard is protecting the condenser from the dust.
(22) Hose Coupling(SI-300/600)
Circulating the heating medium in Evaporator when decreasing the inner temperature.
Electric requirements
100V, 50/60Hz
120V, 60Hz
230V, 50Hz
100V, 50/60Hz
120V, 60Hz
230V, 50Hz
overpower.
Fuse Quantity
2 EA
AC 250V, 10A
Slow-blow
2 EA
AC 250V, 5A
2 EA
Slow-blow
2 EA
AC 250V, 12A
Slow-blow
2 EA
AC 250V, 8A
2 EA
Slow-blow
Remarks
Page 15