Jeio tech Lab companion SI-300 Operating Instruction page 26

Program Control Function of Timer Button
9- steps Prgramed Control serve to operate each 9deffrent
temperatrue and time (99hours 59minutes, max).
Possible to repeate the operation from one to 200 cycles.
Press Timer Button 5times, the Prgrammed Control Function is
displayed
① The repeating total step number
is displayed. If Loop 100, the
unit operates
repeately.
If input over 1 cycle, the next
screen will appears.
If not operating the program,
Input No.0.
Press Up button and Down button
to select the desired value.
Press Enter button to finish the
menu.
② SEg.L is for
segment. If input
Prgram will repeate from the
second segment.
Press Up button and Dwon button
to select the desired value.
Press Enter button to finish the
set.
③ Prg.1 is for inputing the
maintenance time for the first
stpe.
Press Up button and Dwon button
to select the desired value.
Press Enter button to finish the
set
④ The second
inpputing the temp to maintain.
(4℃~60℃ )
Press Up button and Down button
to select the desired value.
Press Enter buttonto finish the
set.
100 cycles
deviding the
3, NO.3
step is for
Page 25