17. Operating Monitoring Program
1) Connection for communication
Click Comm → Connect and your PC and equipment will be connected to RS-232
communication.
(In case of no connection, click Comm → Port and try other ports.)
" On Line" displays on the bottom of the software once communication is connected
successfully. The window consists of 2 separate windows. Window on the top displays
set temperatures and actual temperatures, and window on the bottom displays output
value of heating in a graph mode.
2) View menu
2.1. If you click View → Parameter, window displays actual temperatures, set
temperatures and output of heating by a graph and figures.
2.2. If you click View → Status, additional separated window appears below the
window showing actual temperatures and set temperatures. Operating, Auto Tune,
Program, Over Temp., Level, and etc display on this window.
Page 56