Jeio tech Lab companion SI-300 Operating Instruction page 60

○ 8 ○ 9 Scroll icon
- To scroll graph.
1 0 ○ 1 1 Auto Trace On/Off ○
- If you want to fix and monitor the end point of graph on the center of windows, Click
Auto Trace.
1 2 ○ ○
1 3 Auto Span On/Off
- Set Y axis (temperature range) of graph manually or automatically. You can put values
of range if you choose manual.
○ ○ ○
14 15 16
○
1 4 To display Status window. (Ctrl + T)
○
1 5 To display Parameter window. (Ctrl + R)
○
1 6 Panel View
- When you click Panel View, the same appearance of displayed panel of unit pops up and
you can control the unit by the pop-up window.
○
1 7 Set Pattern of Program Run
- Set Pattern of Program Run and makes unit in a programmable operation.
- Maximum number of pattern is 100 during 99 hours.
○
1 8 Program Run
Program Run must be set in the main unit.
1 9 ∼ ○ 2 2 Zoom In/Out ○
2 3 ∼ ○ 2 4 Icons to convert the unit of temperature from ℃ to ℉ or vice versa. ○
(Note: Unit of temperature of main body is not changed even though you convert the unit
from Lab Tracer. To change the unit of temperature of main body, you must change it using
the controller in main body.)
○
2 5 To erase the graph.
○ ○ ○ ○
17 18 19 20
Program function can be controlled only by PC.
○ ○ ○ ○
21 22 23 24
○
25
Page 59