Jeio tech Lab companion SI-300 Operating Instruction page 19

Page 18
6. Entering button for the setting value
Temp Button
Setlects for the temp
Timer Button
Selects for the timer.
Up Button
Increases the set value.
Down Button
Decreases the set value.
Enter Button
After setting the value, store the set value
using of Enter button.
Auto-tune Button
Auto-tune Function operates while pressing
the button for a second.
SHAKE/SET Button
For Checkng the setting and present rpm
and entering the new rpm value
START/STOP Button
Starts and Stops the unit.
When the unit stops operating, user can
remove the beep sound and flashing LED with
Start/Stop Button.
7. Lamp Button
Turns On / Off the inner Lamp.
8. Shaker I/O Button
Shaker I/O Buton
Starts/ Stops the shaking table.
9. Power switch
Power switch
Turns On / Off the Power to shaker.