Warning For Safe Operation - Jeio tech Lab companion SI-300 Operating Instruction

1. Warning for safe operation

1. Please check the voltage, phase and capacity of power supply and connect properly.
☞ Abnormal connection causes fire or electronic shock.
☞ Power cord must be plugged into a wall outlet with grounded terminal.
2. Do not insert a lot of plug into the outlet at once.
☞ Using of unreasonable electronic power causes electric shock and fire.
☞ Must use a separate electronic wiring for the Temp & Humidity Chamber.
3. Power supply must be properly grounded.
☞ Abnormal grounded connection causes serious damage. Grounded connection must
not be on the water pipe and gas pipe.
4. Please check the power supply and frequency on the ID plate before installation.
☞ The unit requires an independent line (100V, 120V, 230V, single phase), a
grounded and polarized.
(100V, 120V:16AWG,12A,1.25SQ ; 230V:18AWG,10A,0.75SQ)
5. Do not install the product in the place that the gas could leak out.
6. Do not use in the place that has the industrial oil smoke and the metallic dust.
☞ It causes fire or electric shock.
7. Unplug, when there is strange sound, smell and smoke from the product.
☞ Please request the service.
☞ It causes fire or electric shock.
8. Keep out of the direct sunlight.
☞ It may cause fire and abnormal operation.
☞ When use in the direct sunlight, please set up a proper interception to make
shade.
9. Do not use in the place that has the industrial oil smoke and the metallic dust.
Keep in the dry place.
☞ It may cause fire and makes the product does not work well.
☞ Request service, if the product is flooded.
10. Do not assemble, repair, modify on your own.
☞ It may cause fire and electric shock.
☞ The product may not work well and fall off in the efficiency of the product .
☞ Please do not use with the exception of the origin purpose.
Warning means that failure to follow this safety
statement could result in serious personal injury, or
death.
Page 7