Jeio tech Lab companion SI-300 Operating Instruction page 18

4. Shaker LED
Shake LED
Illuminates When setting the time.
Flashes during the timer mode.
F/Ward
Illuminates
timer.
Flashes
clockwise mode.
B/Ward
Illuminates when setting the anti clockwise
timer.
Flashes during the timer or clockwise timer
Pause LED
Illuminates when setting the pause timer.
Flashes during the timer mode or pause mode.
5. Temperature LED
Temp LED
Set the temperature using of the TEMP Button,
Illuminates when pressing the START/STOP Button.
Heater LED
Indicates the heater output.
Auto-tune LED
Flahses during Auto-tune function.
Wait on timer LED
After setting time,indicates starting point
of the unit. Illuminates while operating.
Wait off timer LED
After
stops.Flashing
operation. The timer LED is lit, the timer
is standing by.
Door LED
When
heater,circulation fan stops operation.
After 5minutes, break the mainpower then
Door
sound.
Over temp. LED
When the inner temp is over the over temp.
limit, the unit stops then, flahsing the
Over temp LED with audible Beep sound.
when settting
during the timer
setting time, indicates
the timer
opening the door,
LED is flashing
the clockwise
mode or anti
the unit
LED during
shaking table,
with audible Beep
Page 17