The example of Timer function
When not using the Timer function
(All Shaker LED are out)
After input the desired rpm, Press the START/STOP button.
The shaker operates forward.
If the user stops the shaker, press the START/STOP button or
The Shaker I/O button.
The whole time set + Forward or Backward Action
(SHAKE
LED
illumination +
illumination)
Select the hour or minutes in the whole time set,Press Enter
button to iluminate Shake LED.
After setting the forward or backward, Press Enter button
to iluuminate F/WARD LED or B/WARD LED .
The
shaker
starts
H+Run.S).
Forward
LED
operating
until
setting
or Backward
LED
time
(Run,
Page 31