Cleaning - Jeio tech ISF-7100 Operating Manual

5.2 Cleaning

(1) After disconnect the power cord, clean the machine with soft and dried towel.
Regarding the un-removable point, clean the polluted area only by towel with alcohol solvent
(methanol, ethanol) which has low boiling point.
(2) Do not use Acid solution, sharp one, soapy water, detergent and hot water.
It makes the machine discolored. Rubber and plastic part can be change of shape and color.
Especially, do not use volatile matter.
In case of neutral detergent, clean it with the soft fabric and dry well.
(3) Do not put the water to exterior of the machine when you clean the surrounding (Especially, socket
and controller part, it can make short circuit problem.)
(4) After discussion the proper cleaning method to avoid any damage for the machine with Jeiotech,
if you want to clean the machine or remove the polluted area with not mentioned cleaning method
before the clean.
(5) The inside electric part of the machine should be handled by Jeiotech or person who is delegated
by Jeiotech.
(6) If the parts is required to replace, please use genuine parts only.
(7) Technical maintenance is not offered in case of abnormal trouble beyond the normal limit
•
•
Do not soak the machine into water and spray the water.
Do not clean whole body with chlorine bleaching, detergent with chlorine,
an abrasive, ammonia, steel sponge and alcohol solvent (methanol, ethanol)
which has low boiling point.
３４