Jeio tech Lab companion SI-300 Operating Instruction page 35

Page 34
Whole time set + Forward + PAUSE + Backward
operation
(SHAKELED/Forward
illumination)
1. After seting the whole time, Press Enter button to
illuinate SHAKE LED.
2. After setting the backward and forward, Press Enter
button to illuminate F/WARD LED and B/WARD LED.
3. After setting the puase time,. Press Enter button to
illuminate the PAUSE LED.
4. When pressing the START/STOP button, the shaker is
loosing the speed until the desired time moving forward,
then the shkaer puases.
5. Passing thorugh the puase time, the shaker starts
operaiing from backward direction.
6. The shaker repeates the operatoin until the set time
The caution of the Timer Function
① When using the Timer fuction, set each set value, then
must press Enter button to illuminate Display LED.
② Even if illuminate SHAKE LED, the shaker doesn't operate
W hen not illuminating the FORWARD LED or BACKWARD LED.
③ The shaker doesn't operate even if illuminating SHAKE
LED and PAUSE LED.
④ If not setting the time,the shaker operates, the shaker
repeates operation until pressing the START/STOP button.
⑤ Without insetting the set value by turns,illuminates the
SHAKER LED. Press the button, the timer starts operating
only the set value.
⑥ When pressing the button during the timer operation, able
to reinput in the TIMER set time. Press Enter button, the
shaker stops operating slowly and restarts following with
the latest value.
⑦ If the shaker operates the whole time and FORWARD,
LED/Backward LED/PAUSELED all