Main Menu - Ametek DDMC Instruction Manual

DDMC Analog Input Process Meter / Controller
Display Functions & Messages
Display Parameter
Display 1
Dis 1
Output 1
Out 1
Display 2
Dis 2
Output 2
Out 2
Reset
reset
Reset high
Rst Hi
Reset low
Rst Lo
Reset
Rst HL
high & low
Reset tare
Rst tr
Control
Contrl
Automatic
Auto
Manual
nmAn
Password
pass
Password
Pass 1
1
Password
Pass 2
2
Password
Pass 3
3
Unlocked
unloc
Locked
locd
Flashing
999999
-99999
Action/Setting
Description
Program display 1 value
Program output 1 value
(e.g. 4.000 mA)
Program display 2 value
Program output 2 value
(e.g. 20.000 mA)
Press Enter to access the
Reset menu
Press Enter to reset max
display
Press Enter to reset min
display
Press Enter to reset max &
min displays
Reset tare
Enter Control menu
Press Enter to set meter
for automatic operation
Press Enter to manually
control relays or analog
output operation
Enter the Password menu
Set or enter Password 1
Set or enter Password 2
Set or enter Password 3
Program password to lock
meter
Enter password to unlock
meter
Over/under range condition
21

Main Menu

The main menu consists of the most commonly used
functions: Setup, Reset, Control, and Password.
Press Menu button to enter Programming Mode
•
then press the Up arrow button to scroll main
menu.
Press Menu, at any time, to exit and return to
•
Run Mode. Changes made to settings prior to
pressing Enter are not saved.
• Changes to the settings are saved to memory
only after pressing Enter/F3.
• The display moves to the next menu every time a
setting is accepted by pressing Enter/F3.
Instruction Manual