Ametek DDMC Instruction Manual page 2

DDMC Analog Input Process Meter / Controller
Disclaimer
The information contained in this document is
subject to change without notice. AMETEK
makes no representations or warranties with
respect to the contents hereof and specifically
disclaims any implied warranties of
merchantability or fitness for a particular purpose.
See Warranty Information and Terms &
Conditions on www.ametekusg.com
details.
Read complete instructions prior to installation
•
and operation of the meter.
Risk of electric shock or personal injury.
•
• This product is not recommended for life support
applications or applications where malfunctioning
could result in personal injury or property loss.
Anyone using this product for such applications
does so at his/her own risk. AMETEK shall not be
held liable for damages resulting from such
improper use.
WARNING
Cancer and Reproductive Harm -
Limited Warranty
AMETEK warrants this product against defects in
material or workmanship for the specified period
under "Specifications" from the date of shipment
from the factory. AMETEK's liability under this
limited warranty shall not exceed the purchase
value, repair, or replacement of the defective unit.
See Warranty Information and Terms &
Conditions on www.ametekusg.com
details.
Registered Trademarks
All trademarks mentioned in this document are
the property of their respective owners.
© 2020 AMETEK. All rights reserved.
for complete
www.P65Warnings.ca.gov
for complete
2
FREE DDMC Meter View
Programming Software
The meter can be powered from the Micro USB connection.
When using the Micro USB connection, DO NOT apply AC or DC
power to the meter.
The easiest and quickest way to program your meter
is to use the FREE DDMC Meter View programming
software. This software is loaded into the meter and
connects and installs directly to your PC with a USB
cable. We recommend that the first thing you do after
taking the meter out of the box is connect the meter to
your PC with the provided USB cable – do not use a
different cable. DO NOT apply AC or DC power to the
meter while your PC is connected to the meter as it
will disrupt the USB connection. You do not even
have to apply an input signal.
DDMC Meter View programming software is intuitive,
and most customers can get their meter programmed
as they like without even looking in the manual.
In addition to programming, the software may be used
for:
Monitoring
•
Datalogging using your PC
•
Generating and saving programming files for
•
later use
Once your meter is programmed the way you want it,
you can wire it up for your application per the
instructions in this manual and install it. If you find that
you need to make adjustments to the programming
after the meter is installed, you can use the front panel
buttons and the instructions in this manual to do so.
Instruction Manual