Table of Contents
Advertisement
(900) Alarm 1 setting
Possible to select set alarm 1 mode (on), non-alarm mode (oFF), and
change the set value if alarm 1 mode is selected.
Procedure
Hold down the set button (
1
for
1sec.
or
parameter change mode.
2
Select
alarm
non-alarm mode (oFF) by UP or
DOWN button (
3
To select non-alarm mode (oFF),
hold down the mode button ( ) for
1sec. or longer. To select alarm
mode, hold down the set button
＋
(
) to start the mode for set
details.
4
<Hereafter, only when (on) is set>
Select the limiter mode by UP or
DOWN button (
down the set button (
Select by Low (Lo), up (UP) and
hold down the mode button ( ) for
1sec. or longer to set the mode.
Select alarm mode by UP or DOWN
5
button (
). Hold down the set
or
＋
button (
) for 1sec. or longer.
After the value starts flashing,
change the value within the range
of -20 to 120.0%. After changing,
hold down the mode button ( ) for
1sec. or longer to set the value.
6
Hold down the mode button ( ) for
1sec. or longer. Hold down again
for 1sec. or longer after interval
59
＋
)
longer
to
start
mode
(on)
or
).
or
), and hold
or
＋
).
LCD display
No.IP8S-OM00009
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IP8001 Series and is the answer not in the manual?
Questions and answers