SMC Networks IP8001 Series Operation Manual page 49

(500) Forced fully-close/
fully-open setting
C
Mode button
Set button
≧1s
＋
（
（ ）
Mode button
Set button
≧1s
≧1s
（ ）
（ ）
＋
Set button
≧1s
（ ）
＋
Mode
button
（ ）
or
Lower limit setting（%）
When forced fully-close / fully-open (on) is selected, set value can
be changed.
Procedure
1 Hold down the set button (
for 1sec. or longer to move on to
parameter change mode.
Press the UP or DOWN button
2
( ) to select (510), and hold
or
down the set button (
1sec. or longer.
3 Select (on) or (oFF) with UP or
DOWN button (
＜Hereafter, only when (on) is set＞
4
For setting the lower value with
(510), hold down the set button
( ＋ ) for 1sec. or longer for 2
times with some interval. A fter
values start flashing, change the
value within the range of 0.0 to
10%. After changing, hold down the
mode button (
longer for 3 times with some
interval.
48
） ≧1s
Mode button
（
Set button
≧1s
（ ）
＋
Mode
button
≧1s ≧1s
Span setting
（ ）
failure
Upper limit setting（%）
Fig. 37-4
＋
)
＋
) for
).
or
) for 1 sec. or
Set button
≧1s
≧1s
（ ）
）
＋
Set button
≧1s
（ ）
＋
or
LCD display
No.IP8S-OM00009