SMC Networks IP8001 Series Operation Manual page 44

Procedure
4 <Hereafter, only when (on) is set>
For lower limit setting with (310),
hold down the set button (
for 1sec. or longer. After value
starts flashing, change value within
the range of 0.0 to 80.0%. After
changing, hold down the mode
button ( ) for 1sec. or longer to set
the value.
5 Press the UP or DOWN button
( ) to set the upper limit within
or
the range of 40.0 to 125.0% with
(320) as setting lower limit with in
clause 4 above. After changing,
hold down the mode button ( ) for
1sec. or longer to set the value.
6 Hold down the mode button ( ) for
1sec. or longer. Hold down again
for 1sec. or longer after interval.
Mode button
Set button
） ≧1s
＋
（
（
Mode button
Set button
） ≧1s
＋
（
（
Mode button
Set button
） ≧1s
＋
（
（
Lower limit setting （％）
43
LCD display
＋
)
） ≧1s
） ≧1s
Mode button
） ≧1s ） ≧1s
（
Upper limit setting （％）
Fig. 36
or
or
Set button
） ≧1s
＋
（
No.IP8S-OM00009