Sending A Large First-Class® Envelope - Pitney Bowes SendPro C Lite Operator's Manual

Quick start guide
1. Tap Envelope Printing or Print on Envelopes on the Home screen.
2. If you have the accounting feature enabled, tap Account and select an account.If your device's
model number is 8H00 or 9H00 and if you have only a single account, once you select that account
the device will remember that account the next time you start Envelope Printing or Print on
Envelopes.
3. Tap Class.
4. Tap Start Over to show a list of all the available classes.
5. Tap First-Class Retail Metered for a First-Class mail envelope.
6. Tap Letter.
7. Select any special services you wish to use.
8. Tap Apply.
9. Place the envelope on the scale. The weight appears in the weight button on the screen.
10. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have,
feed the envelopes manually or tap Start to feed the envelopes.
Note:Your device will upload transactions if you have previously printed any mail. Once the upload
completes, you see the message "Transaction upload status, Upload success" with a check mark. Tap
the check mark.
Sending a large First-Class® envelope
Before you select a rate for a large envelope or flat, you need to determine whether the mailpiece you are
sending is a letter or flat (large envelope) according to the USPS.
If your mailpiece weighs more than 3.5 oz, the device automatically sets the class to Large Envelope
regardless of the dimensions. If the mailpiece weighs less than 3.5 oz but has the dimensions of a flat,
you need to manually select Large Envelope when you choose the class.
To determine if your mailpiece meets all the criteria for a flat (dimensions and weight), use the Postal
Advisor app.
To open the Postal Advisor:
Tap Postal Advisor in the application drawer at the bottom of the Home screen, or,
l
Tap SendPro Apps on the Home screen, then tap USPS Postal Advisor.
l
Pitney Bowes Operator Guide February 2021 27