Pitney Bowes SendPro C Lite Operator's Manual page 171

Maintenance
To replace the pad
Before you replace the pad:
Make sure you have a replacement waste pad available and you have the instruction sheet that
l
comes with the pad. The sheet contains the reset code you will need in order to complete the
replacement process.
1. Tap Replace Pad.
2. The instructions for replacing the existing pad display on the screen.
3. Follow the steps in each screen. To advance from one screen to the next, swipe to the left on the
screen.
4. After you slide the waste tray with the new pad back in place, tap Reset Ink Waste Counter to
continue.
5. Use the keypad to enter the reset code.
6. After you enter the code, the message "Your Ink Waste Pad is Ready to Use" displays. If you do
not see this message, or if you still get a message that the waste tank is full, restart the device. If
that fails to clear the message, contact Pitney Bowes support.
If the message no longer appears on the screen follow these steps:
If you need a replacement waste pad, use the Supplies app to purchase the pad.
To replace the pad:
1. Tap the Settings icon in the toolbar.
2. Scroll down and tap Envelope Printer Maintenance.
Pitney Bowes Operator Guide February 2021 171